Anti-Static ESD High Temperature Soldering and Gluing Station Mat Kit, (Select Size of Mat Kit from Above Drop Down Menu) includes a UK or EU Grounding kit.
Mat Temperature Resistance, test performed on top surface with an adjustable–temperature soldering iron. The soldering iron tip was placed on the mat surface for approx. 10sec for each temperature range. The hot glue once cooled peeled away leaving a very faint mark.
150C No defect, 200C No defect, 250C No defect, 300C Very slight, 400C Slight indent, 450C Burnt.
1 x ESD Grounding bench mat: 500 x 600mm or 500 x 1000mm.
1 x Anti-Static grounding plug, UK or EU. includes a one meg-ohm resistor, only the earth pin is used. Made in Great Britain.
1 x Grounding straight cable length 10ft.
1 x Mat adapter.
1 x Grounding coiled cable length 6ft.
1 x wrist strap.
Full instructions on how to set up your anti-static bench mat
The mat is made up of two layers; the top layer is dissipative with the bottom layer being conductive.
• Mat thickness: up to 2.1mm.
• Mat surface: Dissipative about 10/8 ohms.
• Mat bottom layer: Conductive about 10/4 ohms.
• Charge decay to ground: 5000V<50V <0.01second.
• Mat Colours: Grey.